Dashboard
PHP:
8.3.30
OS:
Linux
User:
dh_mnqueb
/
/
etc
📤 Upload
📝 New File
📁 New Folder
Close
Editing: sudo_logsrvd.conf
# # sudo logsrv daemon configuration # [server] # The host name or IP address and port to listen on with an optional TLS # flag. If no port is specified, port 30343 will be used for plaintext # connections and port 30344 will be used to TLS connections. # The following forms are accepted: # listen_address = hostname(tls) # listen_address = hostname:port(tls) # listen_address = IPv4_address(tls) # listen_address = IPv4_address:port(tls) # listen_address = [IPv6_address](tls) # listen_address = [IPv6_address]:port(tls) # # The (tls) suffix should be omitted for plaintext connections. # # Multiple listen_address settings may be specified. # The default is to listen on all addresses. #listen_address = *:30343 #listen_address = *:30344(tls) # The file containing the ID of the running sudo_logsrvd process. #pid_file = /var/run/sudo/sudo_logsrvd.pid # Where to log server warnings: none, stderr, syslog, or a path name. #server_log = syslog # If true, enable the SO_KEEPALIVE socket option on client connections. # Defaults to true. #tcp_keepalive = true # The amount of time, in seconds, the server will wait for the client to # respond. A value of 0 will disable the timeout. The default value is 30. #timeout = 30 # If true, the server will validate its own certificate at startup. # Defaults to true. #tls_verify = true # If true, client certificates will be validated by the server; # clients without a valid certificate will be unable to connect. # By default, client certs are not checked. #tls_checkpeer = false # Path to a certificate authority bundle file in PEM format to use # instead of the system's default certificate authority database. #tls_cacert = /etc/ssl/sudo/cacert.pem # Path to the server's certificate file in PEM format. # Required for TLS connections. #tls_cert = /etc/ssl/sudo/certs/logsrvd_cert.pem # Path to the server's private key file in PEM format. # Required for TLS connections. #tls_key = /etc/ssl/sudo/private/logsrvd_key.pem # TLS cipher list (see "CIPHER LIST FORMAT" in the openssl-ciphers manual). # NOTE that this setting is only effective if the negotiated protocol # is TLS version 1.2. # The default cipher list is HIGH:!aNULL. #tls_ciphers_v12 = HIGH:!aNULL # TLS cipher list if the negotiated protocol is TLS version 1.3. # The default cipher list is TLS_AES_256_GCM_SHA384. #tls_ciphers_v13 = TLS_AES_256_GCM_SHA384 # Path to the Diffie-Hellman parameter file in PEM format. # If not set, the server will use the OpenSSL defaults. #tls_dhparams = /etc/ssl/sudo/logsrvd_dhparams.pem [relay] # The host name or IP address and port to send logs to in relay mode. # The syntax is identical to listen_address with the exception of # the wild card ('*') syntax. When this setting is enabled, logs will # be relayed to the specified host instead of being stored locally. # This setting is not enabled by default. #relay_host = relayhost.dom.ain #relay_host = relayhost.dom.ain(tls) # The amount of time, in seconds, the server will wait for a connection # to the relay server to complete. A value of 0 will disable the timeout. # The default value is 30. #connect_timeout = 30 # The directory to store messages in before they are sent to the relay. # Messages are stored in wire format. # The default value is /var/log/sudo_logsrvd. #relay_dir = /var/log/sudo_logsrvd # The number of seconds to wait after a connection error before # making a new attempt to forward a message to a relay host. # The default value is 30. #retry_interval = 30 # Whether to store the log before relaying it. If true, enable store # and forward mode. If false, the client connection is immediately # relayed. Defaults to false. #store_first = true # If true, enable the SO_KEEPALIVE socket option on relay connections. # Defaults to true. #tcp_keepalive = true # The amount of time, in seconds, the server will wait for the relay to # respond. A value of 0 will disable the timeout. The default value is 30. #timeout = 30 # If true, the server's relay certificate will be verified at startup. # The default is to use the value in the [server] section. #tls_verify = true # Whether to verify the relay's certificate for TLS connections. # The default is to use the value in the [server] section. #tls_checkpeer = false # Path to a certificate authority bundle file in PEM format to use # instead of the system's default certificate authority database. # The default is to use the value in the [server] section. #tls_cacert = /etc/ssl/sudo/cacert.pem # Path to the server's certificate file in PEM format. # The default is to use the certificate in the [server] section. #tls_cert = /etc/ssl/sudo/certs/logsrvd_cert.pem # Path to the server's private key file in PEM format. # The default is to use the key in the [server] section. #tls_key = /etc/ssl/sudo/private/logsrvd_key.pem # TLS cipher list (see "CIPHER LIST FORMAT" in the openssl-ciphers manual). # NOTE that this setting is only effective if the negotiated protocol # is TLS version 1.2. # The default is to use the value in the [server] section. #tls_ciphers_v12 = HIGH:!aNULL # TLS cipher list if the negotiated protocol is TLS version 1.3. # The default is to use the value in the [server] section. #tls_ciphers_v13 = TLS_AES_256_GCM_SHA384 # Path to the Diffie-Hellman parameter file in PEM format. # The default is to use the value in the [server] section. #tls_dhparams = /etc/ssl/sudo/logsrvd_dhparams.pem [iolog] # The top-level directory to use when constructing the path name for the # I/O log directory. The session sequence number, if any, is stored here. #iolog_dir = /var/log/sudo-io # The path name, relative to iolog_dir, in which to store I/O logs. # Note that iolog_file may contain directory components. #iolog_file = %{seq} # If set, I/O logs will be compressed using zlib. Enabling compression can # make it harder to view the logs in real-time as the program is executing. #iolog_compress = false # If set, I/O log data is flushed to disk after each write instead of # buffering it. This makes it possible to view the logs in real-time # as the program is executing but reduces the effectiveness of compression. #iolog_flush = true # The group to use when creating new I/O log files and directories. # If iolog_group is not set, the primary group-ID of the user specified # by iolog_user is used. If neither iolog_group nor iolog_user # are set, I/O log files and directories are created with group-ID 0. #iolog_group = wheel # The user to use when setting the user-ID and group-ID of new I/O # log files and directories. If iolog_group is set, it will be used # instead of the user's primary group-ID. By default, I/O log files # and directories are created with user and group-ID 0. #iolog_user = root # The file mode to use when creating I/O log files. The file permissions # will always include the owner read and write bits, even if they are # not present in the specified mode. When creating I/O log directories, # search (execute) bits are added to match the read and write bits # specified by iolog_mode. #iolog_mode = 0600 # The maximum sequence number that will be substituted for the "%{seq}" # escape in the I/O log file. While the value substituted for "%{seq}" # is in base 36, maxseq itself should be expressed in decimal. Values # larger than 2176782336 (which corresponds to the base 36 sequence # number "ZZZZZZ") will be silently truncated to 2176782336. #maxseq = 2176782336 [eventlog] # Where to log accept, reject, exit, and alert events. # Accepted values are syslog, logfile, or none. # Defaults to syslog #log_type = syslog # Whether to log an event when a command exits or is terminated by a signal. # Defaults to false #log_exit = true # Event log format. # Supported log formats are "sudo" and "json" # Defaults to sudo #log_format = sudo [syslog] # The maximum length of a syslog payload. # On many systems, syslog(3) has a relatively small log buffer. # IETF RFC 5424 states that syslog servers must support messages # of at least 480 bytes and should support messages up to 2048 bytes. # Messages larger than this value will be split into multiple messages. #maxlen = 960 # The syslog facility to use for event log messages. # The following syslog facilities are supported: authpriv (if your OS # supports it), auth, daemon, user, local0, local1, local2, local3, # local4, local5, local6, and local7. #facility = authpriv # Syslog priority to use for event log accept messages, when the command # is allowed by the security policy. The following syslog priorities are # supported: alert, crit, debug, emerg, err, info, notice, warning, none. #accept_priority = notice # Syslog priority to use for event log reject messages, when the command # is not allowed by the security policy. #reject_priority = alert # Syslog priority to use for event log alert messages reported by the # client. #alert_priority = alert # The syslog facility to use for server warning messages. # Defaults to daemon. #server_facility = daemon [logfile] # The path to the file-based event log. # This path must be fully-qualified and start with a '/' character. #path = /var/log/sudo # The format string used when formatting the date and time for # file-based event logs. Formatting is performed via strftime(3) so # any format string supported by that function is allowed. #time_format = %h %e %T
Save
Cancel